Universal timers provide precise timing for laboratory work. The timer can be wall mounted or used on a benchtop. Laboratory appliances can be automatically switched on or off with this electric timer. Two separate and grounded outlets are provided.
Precise timing for laboratory work. Case measures 8½" × 8½" × 2¼". Has both rubber feet for bench use or key slot holes for wall mounting. Dial is 8" in diameter. Timer figures are very large. The outer circle of numbers reads elapsed time. The inner circle of numbers can be used as a stopwatch. Unit has a built-in buzzer that will sound at the end of each timing cycle.
Laboratory appliances can be automatically switched on or off with this electric timer. Two entirely separate and grounded outlets are provided. Outlet “A” is controlled by a switch and can either make or break a circuit when the timer reaches zero. Outlet “B” is independent of a switch and always will break a circuit at zero on the timer.
Specifications
Input voltage: 100 to 130 V AC, 50/60 Hz or 210 to 250 V AC, 50-60 Hz Power rating of AC outlets: maximum 750 watts combined load; both outlets at 120 V AC. UL listed. Total time range: 60 minutes by minutes and seconds.
1-800-452-1261
