Talk to a Flinn Scientist or Customer Service Rep1-800-452-1261M-F 7:30am-5pm CT

Teacher Resources

Instructions to Refinish Epoxy Resin Tabletops

Instructions to Refinish Epoxy Resin Tabletops
1. Tops should be thoroughly cleaned of oil, wax, or residue, using lacquer thinner.
2. Existing finish should then be thoroughly sanded with an 80-grit sandpaper to feather edge any nicks, scratches, etc., and remove any buildup of residue.
3. Tops should then be thoroughly sanded with a fine abrasive 150-grit to 180-grit sandpaper to prepare them for the new finish.
4. Apply a primer coating by brush and/or roller. The primer coating should be formulated to be compatible with the epoxy finish coat.
5. After the primer coating is thoroughly dry (8 to 10 hours), sand with a fine grit sandpaper, 180- to 200-grit.
6. Remove all sanding dust with a tack rag and apply the epoxy finish coat with brush and/or roller.
7. If a second coating is required to obtain desired finish, repeat steps 5 and 6.
8. Primer and epoxy coating are available from Flinn Scientific, Inc.
9. The above procedure is a recommendation only. Due to the many possible variations of materials used for tabletops, Flinn Scientific is not able to warranty the final results or accept any liability for failure of the applied finish.
P.O. Box 219, Batavia, IL60510



*Advanced Placement and AP are registered trademarks of the College Board, which was not involved in the production of, and does not endorse, these products.