P.O. Box 219 Batavia, IL 60510

Phone 800-452-1261
Fax 866-452-1436

Personalize My Experience:

Flinn Dilutit™ Laboratory Exhaust System

by Flinn Scientific

Item #: AP1690

Price: $914.10

Base Cabinet for Labconco Basic™ Fume Hood includes chemical resistant Trespa® work surface, hinged doors, and one adjustable shelf. Cabinet is 22" deep and uses panels to extend the work surface.

See more product details

This item can only be shipped to schools, museums and science centers

Product Details

Your “Best” Solution to Protect Teachers and Students from Being Overexposed to Hazardous Laboratory Chemicals The Flinn DILUTIT™ laboratory exhaust fan will move and exchange almost 3,000 ft³ of air in just one minute. Imagine a complete air exchange for your laboratory in less than 5 minutes! • Complete air exchange in 5 minutes • Complies with OSHA Regulations • Moves 2,845 cubic feet of air per minute • Fingertip control on/off switch A 19" square wall opening is required to accommodate DILUTIT. Access to a 15 amp, 110 volt, 60 Hz electrical service is required. Installation may be through an existing window opening or through a wall. High hazard situations may dictate the use of a hazardous location fan. Fan is UL Listed (E62643) for Class I, Group D and Class II, Groups E, F and G hazardous locations. The exhaust outlet of this 1/4 horsepower fan has automatic shutters to totally enclose the fan when not in operation. It operates with 1725 RPM at 4.4 full load amps. Weight is 25 pounds.