Teacher Notes

Sea Floor Spreading

Student Activity Kit

Materials Included In Kit

Ocean Base, blue, laminated, 10
Ocean Crust Worksheet, purple, laminated, 10
Ocean Crust Worksheet, red, laminated, 10
Ocean Crust Worksheet, yellow, laminated, 10
Pangaea Continental Plates Worksheet, green, laminated, 10

Additional Materials Required

Marker, dry-erase
Paper towels
Scissors

Safety Precautions

This activity is considered nonhazardous. Follow all normal classroom guidelines.

Teacher Tips

  • Enough materials are provided in this kit for 30 students working in groups of three. This activity may be completed in two 50-minute class periods.
  • The continental plates and ocean crust pieces may be cut out ahead of time if desired.
  • Have students wipe off all markings from the cutouts with paper towels after the activity has been completed.
  • Save all of the cutouts for future use.
  • All drawings and cut-out pieces are approximate and not drawn to scale.
  • Have students further research continental drift and the different types of fossil evidence that support this theory, the theory of plate tectonics and how it relates to continental drift, and the types of climate that may have been present on different continents before Pangaea broke apart.
  • Continents continue to move at a rate of anywhere between 1 cm and 12 cm a year. Have students make calculations to determine how long it would take a specific continent to move varying distances.
  • Have students draw timelines for the Cenozoic, Cretaceous, and Jurassic periods, and record on the timelines the major changes that occurred during each period.

Correlation to Next Generation Science Standards (NGSS)

Science & Engineering Practices

Developing and using models
Constructing explanations and designing solutions

Disciplinary Core Ideas

MS-ESS2.B: Plate Tectonics and Large-Scale System Interactions
HS-ESS1.C: The History of Planet Earth
HS-ESS2.B: Plate Tectonics and Large-Scale System Interactions

Crosscutting Concepts

Structure and function

Performance Expectations

HS-PS2-6: Communicate scientific and technical information about why the molecular-level structure is important in the functioning of designed materials.
HS-ETS1-2: Design a solution to a complex real-world problem by breaking it down into smaller, more manageable problems that can be solved through engineering.

Answers to Questions

Part 1

  1. What do you observe about how the shapes of the continents and ocean crust pieces fit together?

    The continents and ocean crust pieces fit together very well—almost like they are pieces of a giant puzzle.

  2. Define sea floor spreading. Where does it occur?

    Sea floor spreading occurs when the molten material in the mantle rises to the surface of the mid-ocean ridges. This molten material then flows sideways carrying the sea floor away from the ridge in both directions. As the sea floor spreads apart the molten magma moves upwards and creates new sea floor as it cools. As this new cooling sea floor contracts and becomes denser it sinks and forms a ridge. Sea floor spreading occurs in central locations of the ocean.

  3. Briefly describe the basic assumptions of plate tectonics. What geologic features or events occur at plate boundaries?

    According to plate tectonics, the Earth’s crust and part of the upper mantle are broken into sections called plates. These plates move around on the mantle just like rafts float on water. The plates can move toward each other and collide, they can pull apart or they can simply slide past one another. When the plates interact with one another the result of their movement can be seen at the plate boundaries. At these plate boundaries, mountains may form, volcanoes may form and erupt, or earthquakes may occur.

Part II
  1. How do the overall size of the oceans 66 million years ago compare to the size of today’s oceans?

    The size of the oceans 66 million years ago was much smaller than their current size.

  2. From your observations, what can you conclude about the strength or durability of the continent landmasses?

    The continental plates or crust must be very strong. The majority of the continental landmasses do not deform as they move.

  3. What time period does the continent/ocean floor configuration formed in Part II represent?

    This configuration represents the Cretaceous Period.

Part III
  1. What geological time period does the continent/ocean floor configuration formed in step 2 of Part III represent? What was the most well-known type of organism alive during this time period?

    This configuration represents the Jurassic Period. Dinosaurs are the most well-known organism from this time period.

  2. When did the supercontinent Pangaea form?

    Pangaea formed 250 million years ago.

  3. Record all observations about the assembled simulated Pangaea landmass.

    Observations will vary. Students will observe that Pangaea forms the shape of a C, Pangaea is one solid land mass, etc.

Part IV
  1. Define continental drift.

    Continental drift is the process of the continents breaking off from one another and moving around the globe over millions of years to reach their current locations.

  2. Name the three types of evidence that support continental drift.

    Fossil, climate and rock evidence.

  3. What is a craton?

    A craton is a stable core mass of the Earth that can be divided into smaller groups relating to their shape or form.

  4. Explain, in your own words, the relevance of the following evidence regarding the existance of Pangaea:

    Answers will vary. Students should mention that these objects are found on different continents that were once connected.

    The types of cratons found in South America and Africa.
    Answers will vary. Students should mention that the types of cratons found in South America and Africa line up very well when the two continents are next to one another.

    The fossils of Mesosaurus and Glossopteris.
    Answers will vary. Students should mention that these fossils are found on different continents that were once connected.

Teacher Handouts

12607_Teacher1.pdf

Student Pages

Sea Floor Spreading

Introduction

Observe the amazing consequences of sea floor spreading and continental drift over geological time using the following hands-on activities.

Concepts

  • Sea floor spreading
  • Continental drift
  • Pangaea
  • Plate tectonics

Background

Pangaea, Greek for “all Earth,” is the name given to the supercontinent that existed during the Paleozoic and Mesozoic eras about 250 million years ago (see Figure 1). The term Pangaea was first coined by the German meteorologist Alfred Wegener (1880–1930) in the early 1900s when he observed that the margins of the current continents looked like pieces of a giant puzzle. Wegener hypothesized that the land masses that composed Pangaea must have broken off and drifted away from one another over time. He called this process continental drift. Wegener’s ideas about continental drift were very controversial and not accepted until well after his death in the 1930s.

{12607_Background_Figure_1_Pangaea}
There are three main types of evidence, besides the apparent puzzle-like fit of the continents, that support the theory of continental drift—fossil evidence, climate evidence and rock evidence. Fossils of the reptile Mesosaurus have been found in both Africa and South America. This swimming reptile lived on land in freshwater. It is very unlikely that it could have swum between the two continents. Mesosaurus must have lived on both continents when they were combined. Another fossil that supports continental drift is the plant Glossopteris. This fossil fern has been found in Australia, Antarctica, Africa, India and South America. Finding this fossil in such different climates implies that all of these areas were once connected and had similar climates. Similar rock structures and types of rocks have also been found on different continents, lending to further support to continental drift.

In the 1940s and early 1950s scientists began to use sound waves to map large areas of the Earth’s ocean floors. It was found that the ocean floors were very complex and had mountains and valleys similar to the continents above water. A series of ridges extending through the center of the Atlantic, Pacific and other oceans were also discovered. These underwater, mountain-like ridges stretch along the center of most of the Earth’s ocean floor. How were these ridges formed? In the early 1960s, Princeton scientist Harry Hess proposed the theory of sea floor spreading. Sea floor spreading occurs when the molten material in the mantle rises to the surface of the mid-ocean ridges. The molten material then flows sideways, carrying the sea floor away from the ridge in both directions (see Figure 2). As the sea floor spreads apart the molten magma moves upwards and creates new sea floor as it cools. As this new cooling sea floor contracts and becomes denser it sinks and forms a ridge.
{12607_Background_Figure_2_Sea floor spreading}
With the discovery of continental drift and sea floor spreading, scientists began to understand how the sections of sea floor and continents moved in relation to one another. In the late 1960s, a new theory was formed called plate tectonics. According to this theory, the Earth’s crust and part of the upper mantle are broken into sections called plates. These plates move around on the mantle just like rafts float on water. The plates can move toward each other and collide, they can pull apart, or they can simply slide past one another. When the plates interact with one another the results of their movement can be seen at the plate boundaries. At these plate boundaries, mountains may form, volcanoes may form and erupt or earthquakes may occur.

Experiment Overview

In the following activities you will simulate the movement of the continents and sea floor over geological time and observe evidence of continental drift.

Materials

Marker, dry-erase
Ocean Base, blue, laminated
Ocean Crust Worksheet, purple, laminated
Ocean Crust Worksheet, red, laminated
Ocean Crust Worksheet, yellow, laminated
Pangaea Continental Plates Worksheet, green, laminated
Paper towels
Scissors

Safety Precautions

This activity is considered nonhazardous. Follow all normal classroom guidelines.

Procedure

Part I. The Current Ocean Floor

  1. Obtain the green Pangaea Continental Plate Worksheet and a pair of scissors.
  2. Cut out all of the continental plates on the worksheet along the dotted lines.
  3. Note that the continental plate cutouts show the smooth edges of the continental plates and not the current day coastlines.
  4. The continental plates are numbered as follows:
    1. North America
    2. Greenland
    3. Eurasia
    4. South America
    5. Africa
    6. Adriatic Promontory
    7. Arabia
    8. Antarctica
    9. Madagascar
    10. India
    11. Australia
  5. Obtain the yellow, red and purple Ocean Crust Worksheets. Use scissors to cut out all of the ocean crust pieces on this worksheet.
  6. Obtain the blue ocean base.
  7. Assemble all of the Pangaea Continental and Ocean Crust pieces on the blue ocean base as shown in Figure 3. G = Green, P = Purple, R = Red, Y = Yellow. Note that not all of the pieces are interlocking. This is a representation of the Earth’s current ocean floor.
    {12607_Procedure_Figure_3_Current ocean floor}
  8. Obtain a dry-erase marker and draw lines down the center of the purple ocean crust cutouts. These lines represent the midocean ridges where magma poured out onto the ocean basin and new ocean crust formed.
  9. Use the dry-erase marker to label all of the purple ocean crust pieces “066 MY.” The purple ocean crust pieces represent the ocean crust from the present day to 66 million years ago.
  10. Use the dry-erase marker to label all of the red ocean crust pieces “66 to 144 MY.” The red ocean crust pieces represent the ocean crust from 66 to 144 million years ago.
  11. Use the dry-erase marker to label all of the yellow ocean crust pieces “144 to 164 MY.” The yellow ocean crust pieces represent the ocean crust from 144 to 164 million years ago.
  12. Leave all of the pieces in the same configuration on the blue ocean base for Part II.
  13. Answer the questions for Part I on the Sea Floor Spreading Worksheet.
Part II. The Ocean Floor 66 to 144 Million Years Ago
  1. Remove the purple ocean crust pieces from the blue ocean base.
  2. Push all of the continents and remaining ocean crust pieces together until they are connected (see Figure 4). Note: Africa should be left in its original position as it has not moved significantly over the last 164 million years. The locations of the continents and sea floor represent their probable configuration during the Cretaceous Period.
    {12607_Procedure_Figure_4_Ocean floor 66–144 million years ago}
  3. Leave all of the pieces in the same configuration on the blue ocean base for Part III.
  4. Answer the questions for Part II on the Sea Floor Spreading Worksheet.
Part III. The Ocean Floor 144 and 164 Million Years Ago
  1. Remove the red ocean crust pieces from the blue ocean base.
  2. Push all of the continents and remaining ocean crust pieces together until they are connected (see Figure 5). The locations of the remaining continents and sea floor represent their probable configuration at the end of the Jurassic Period.
    {12607_Procedure_Figure_5_Ocean floor 144–166 million years ago}
  3. Remove the yellow ocean crust pieces from the blue ocean base.
  4. Push all of the continents together into one large land mass (see Figure 1 from the Background section). The resulting land mass represents the supercontinent Pangaea.
  5. Leave all of the pieces in the same configuration on the blue ocean base for Part IV.
  6. Answer the questions for Part III on the Sea Floor Spreading Worksheet.
Part IV. Evidence of Continental Drift
  1. Notice that a single large ocean surrounds the Pangaea land mass. Using a dry-erase marker, label this ocean Panthalassa on the blue ocean base.
  2. Notice the small sliver of water between Eurasia and the Adriatic Promontory. This is the Thetys Sea. Label this sea on the blue ocean base.
  3. Evaporite (water-soluble mineral sediments) and calcium carbonate deposits have been found in North America, Europe, and Africa. Using Figure 6 as a guide, label these deposits with a dry-erase marker on the continental plates with triangles.
    {12607_Procedure_Figure_6_Evaporite and calcium carbonate deposits}
  4. Every continent consists of a stable core crust mass called a craton. Cratons are classified into four groups based on their structure. In Figure 7, four different types of cratons are shown—shield, extended crust, platform and basin. They are identified as follows:

    Shield—rocks crop out from the surface
    Extended crust—area where crust is pulled apart or rifted
    Platform—covered by sedimentary rock
    Basin—a low sinking region

  5. Use a dry-erase marker to mark the location of the four types of cratons on the South America and Africa continental plates, as shown in Figure 7.
    {12607_Procedure_Figure_7_Cratons}
  6. Place the South America and Africa plates next to each other and note how the different cratons line up.
  7. Fossils of the reptile Mesosaurus are found in both South America and Africa, while fossils of the plant Glossopteris are found in Africa, India, Antarctica, Australia and South America. Using a dry-erase marker, draw the locations of these fossils as shown in Figure 8.
    {12607_Procedure_Figure_8_Fossil evidence}
  8. Answer the questions for Part IV in the Sea Floor Spreading Worksheet.

Student Worksheet PDF

12607_Student1.pdf

Next Generation Science Standards and NGSS are registered trademarks of Achieve. Neither Achieve nor the lead states and partners that developed the Next Generation Science Standards were involved in the production of this product, and do not endorse it.