Page 55 - Demo
P. 55
“Your Safer Source for Science”
Burners, Meker
53
Burners, Meker
Meker, or high temperature burners are required where an extremely hot flame is needed. A Meker cap on the burner forms many short, small, uniform blue heat cones and eliminates back-flashing. Accepts burner tubing 3⁄8" inside diameter (Catalog No. AP8286). Maximum tempera- ture of flame can reach 1775 °C.
Burners, Portable, Laboratory
A self-contained laboratory burner. Ideal as a safer alternative to alcohol burners. Burner assembly mounts on a butane canister. With the gas control valve wide open the “burn time” for a fresh canister should be approximately three hours. Fully adjustable gas control valve. Air supply is fully adjustable using knurled screw knob. A 3" diameter drip catcher is permanently mounted in the burner assembly. The drip catcher also acts as a heat dissipator to prevent burner heat from being transferred to the area of the burner assembly where the gas control is adjusted.
Meker Burner AP1021, etc.
Portable Laboratory Burner AP1032
Catalog No.
Description
Type of Gas
Price/Each
AP1021
Meker Burner
Artificial
$73.45
AP1023
Bottled (Liquid Propane)
71.55
AP1022
Natural
75.30
Catalog No.
Description
Price/Each
AP1032
Portable Laboratory Burner
$56.00
AP1033
Replacement Butane Cartridge
14.70
AP6751
Replacement Burner Head
46.20
Flame Temperature Distribution
The Bunsen/Tirrill burner and Meker burner differ not only in the higher maximum temperature produced, but also in heat distribu- tion within the flame.
See free video at flinnsci.com.
Bunsen/Tirrill Burner Flame
Meker Burner Flame
Select Your Laboratory Gas Burner
Your burner will operate most efficiently if you take the time to learn about the nature of your gas source. The three most common gas sources are as follows:
• Artificial gas (e.g., coal gas, water gas)—Generally low BTU content
(800 BTU or less)
• Natural gas (e.g., methane)—Medium BTU content (1000 to 1100 BTU) • Bottled gas (e.g., propane, mixtures of propane and butane)—High BTU
content (2000 to 3000 BTU) See free video at flinnsci.com.
Burners, Tirrill
Unlike a Bunsen burner, a Tirrill burner allows adjustment of both the air supply and the gas supply. Adjustable air ports regulate the air supply and a brass needle valve regulates the gas supply. Accepts burner tubing 3⁄8" inside diameter (Catalog No. AP8286). Maximum tempera- ture of flame can reach 1560 °C.
*AP1019, natural gas model and AP1020, bottled gas model are furnished with flame retainers. AP1018, artificial gas model, is not furnished with a flame retainer.
Tirrill Burner AP1019, etc.
Catalog No.
Description
Type of Gas
Price/Each
AP1019
Tirrill Burner
Natural*
$32.15
AP1018
Artificial
34.35
AP1020
Bottled (L.P.)*
33.80
Choose a Laboratory Burner
Burner Type
Fuel
Adjustments
Comments
Tirrill (Gas)
Artificial; Natural; Bottled
Air and Gas
Good control over flame adjustment. Very good all-purpose burner.
Meker (Gas)
Artificial; Natural; Bottled
Air and Gas
Produces high temperature; uniform heat.
Laboratory (Portable)
Butane
Air and Gas
Portable; safer than alcohol burners.
Bunsen
Artificial; Natural; Bottled
Air
Standard inexpensive burner.
Bunsen (Micro)
Natural
Air and Gas
Small size; good for use in microscale chemistry.
Bunsen (Propane)
Propane
Gas
Portable; produces a very high temperature flame.
Alcohol
Ethyl Alcohol Burner Fuel, Safety
None
Portable; inexpensive, but poses the greatest safety risk. Cooler flame than gas.