Morris NMR tube cleaner is an inexpensive, durable apparatus that will clean 5 mm or 10 mm NMR tubes with as little as 10 mL of solvent in one easy operation. Wong NMR tube cleaner permits the cleaning of four NMR tubes at the same time.
Morris NMR tube cleaner is an inexpensive, durable apparatus that will clean 5 mm or 10 mm NMR tubes with as little as 10 mL of solvent in one easy operation. Cleaner does not require a stopper on the NMR tube and does not have a fragile side arm. Wong NMR tube cleaner permits the cleaning of four NMR tubes at the same time. With solvent in the reservoir, rapid suction wets the inside of the NMR tube dislodging the contamination. An acetone wash followed by an air stream dries the tube in seconds. Rate of cleaning is approximately four tubes per minute. The NMR tube is inserted into the cleaner with a poly-pro cap placed on the closed end to provide support and a vacuum seal.
Specifications
Note: For use with 5 mm x 7" NMR tube. Wong NMR tube cleaner is supplied with an NMR tube washer and 250 mL heavy wall filter flask.