Your Safer Source for Science
All-In-One Science Solution
Your Safer Source for Science
;
Address P.O. Box 219 Batavia, IL 60510
Phone 800-452-1261
Fax
Email [email protected]
New

PASCO Wireless Light and Color Sensor

Item #: TC1682 

Price: $115.00

In Stock.

The Wireless Light and Color Sensor features an ambient and a directional RGB color light measurements.

See more product details

This item can only be shipped to schools, museums and science centers

Product Details

The Wireless Light and Color Sensor features two separate apertures: One measures ambient light from the side of the box, and the other measures percent color of directional light at the end of the box.

Features
The ambient sensor measures:

- Lux: light energy from a point in a direction (per steradian, a solid angle) per second
- Illuminance: Light intensity per area, or brightness in our eyes’ perceivable range
- Irradiance: Power of the light per area. (Depends on wavelength as UV light has more energy than infrared)
- PAR (Photosynthetically Active Radiation): amount of light in the visible range 400 -700 nm available to stimulate plant growth
- UV Index: 1 to 12 scale for the time light takes to cause skin damage. (Larger numbers cause burns faster.)

The directional spot sensor measures:

- RGB: Light levels as a percent of the total of all colors measured
- White: Total 'white' light intensity as a function of the sensor (on a scale of 65,536)

Specifications

Spectral Response 340 nm to 1150 nm
Illuminance Range 0 to 131,000 lux
Irradiance Range 0 to 1362 W/m2
PAR Range 0 to 2400 umol/m2/s
UV Index Range 0 to 12 (typical in daylight)
RGB Range 0 to 100% of combined colored light
Maximum Sample Rate 2 Hz (ambient); 20 Hz (spot)
Connectivity Bluetooth 5.2

Battery & Logging

Datalogging Yes
Stored Data Points (Logging) 1 >15,000
Battery - Connected (Data Collection Mode) 2 >210 hr (2-3 years of normal classroom use)
Battery - Logging (Data Logging Mode) 3 11 days
Battery Type Coin Cell

1 Minimum # of data points with all measurements enabled, actual results depend on enabled measurements.

2 Continuous use in a connected state until battery failure, actual results will depend on sample rate, active measurements, and battery condition.

3 Logging until battery failure, actual results will depend on sample rate, active measurements, and battery condition.

* Normal classroom use is the sensor in active use for 20min/lab for 120 lab periods/yr.