386 1-800-452-1261
Mechanics Equipment, continued
Force Tables See page 368.
Hall’s Carriage, Economy Choice
Rolls smoothly and effortlessly with even the smallest push. An excellent choice for
all your Newton’s laws, momentum and energy experiments. Carriage and wheels are
made from durable plastic that won’t break when dropped. This carriage will last for
years. Dimensions: 13 cm x 5 cm. Instructions provided.
Catalog No. Description Price/Each
AP6532 Hall’s Carriage, Economy Choice $14.50
Hall’s Carriage
Top quality carriage made of high impact plastic. Machined, aluminum wheels are
mounted on hardened steel cone bearings to ensure minimal friction and long life.
Dimensions: 14 x 6.5 cm.
Catalog No. Description Price/Each
AP9271 Hall’s Carriage $28.35
Hall’s Carriage
AP9271
Hall’s Carriage,
Economy Choice
AP6532
Vernier Dynamics Track and Cart System
Use these tracks with the included Vernier carts and obtain amazingly accurate
results when studying the laws of motion. Coated with a clear anodized finish,
these tracks provide lower friction than bare metal. Adjustable feet and ring-stand
bracket make it easy to level or turn it them into a ramp. Track length of 1.2 meters
is long enough for most dynamics experiments yet a convenient length for storage.
Track includes a plunger cart that has a spring-loaded plunger while the included
dynamics cart is similar but has no plunger. Interchangeable magnetic and hook
and pile end caps make for many possible experiments.
TC1603 includes standard cart with magnetic and hook-and-pile end caps.
TC1595 includes motion encoder receiver and motion encoder cart with magnetic
and hook-and-pile end caps. Additional standard and plunger carts available
separately. Tracks include:
• Combination 1.2 m dynamics track/optics bench
• Plunger cart with magnetic and hook-and-pile end caps
• 4 Hexagonal masses
• Mounting hardware for dual-range force sensor and accelerometers
• Adjustable end stop and motion detector bracket
• 2 Adjustable two-foot levelers
• Rod clamp and 2 Photogate brackets
• Ultra-pulley attachment and pulley bracket
Fan Cart (available separately) has three speeds for studying the effect of variable
thrust. Two mass bars let you change the total mass of the cart to observe
how mass affects acceleration. The fan turns on a protractor base, allowing the
thrust to be directed at a known angle from the direction of travel. Included sail lets
students perform the fan on-a-sailboat experiment. Four AA batteries are required
and available separately.
Vernier Optics Expansion Kit (available separately) includes parts that snap
directly onto the track so they can be left in place while the track is moved and
adjusted. Includes three lenses permanently mounted to plastic supports, which
makes for adjusting the distance between the lenses and light source easy. Also
includes a power supply, light sensor holder and an aperture screen and holder.
Catalog No. Description Price/Each
TC1603 Vernier Dynamics Track and Cart System $282.00
TC1595 Vernier Dynamics Track and Cart System
with Motion Encoder
421.00
TC1552 Standard Cart 95.75
TC1553 Plunger Cart 124.00
TC1596 Fan Cart for TC1603 (Not for TC1595 109.00
TC1598 Vernier Optics Expansion Kit 186.00
Ball Set, Drilled
A convenient set of drilled balls for all your pendulum experiments. Each ball is 25
mm in diameter and has a 3-mm hole drilled exactly through the center. The set of
twelve includes two each of brass, aluminum, steel, cork, wood, and copper. The ball
set comes in its own clear plastic storage box.
Catalog No. Description Price/Each
AP6057 Ball Set, Drilled $70.00
Vernier Dynamics Track and Cart System
Balls
AP5801, etc.
Ball Set, Drilled
AP6057
with Motion Encoder
TC1595
Balls
Drilled balls are used for pendulum bobs or impact experiments. Other balls are
suitable for collision experiments and density/volume experiments.
Catalog No. Description Price/Each
AP5801 Aluminum 3/4", drilled $ 5.80
AP5802 Aluminum 1", drilled 7.20
AP5803 Aluminum 1", with hook 8.40
AP5804 Brass 3/4", drilled 10.20
AP5805 Brass 1", drilled 10.65
AP5806 Brass 1", with hook 10.95
AP5807 Cork 3/4", drilled 3.30
AP5808 Cork 1", drilled 3.85
AP5810 Lead 1", drilled 9.64
AP5811 Lead 1", with hook 9.95
AP5812 Steel 3/4", drilled 5.65
AP5813 Steel 1", drilled 6.50
AP5814 Steel 1", with hook 6.60
AP5819 Steel 3/4", solid 1.83
AP5820 Steel 5/8", solid 1.45
AP5626 Steel 1", solid 3.35
AP7942 Steel 15/16", solid 3.35
AP5815 Wood 3/4", drilled 2.10
AP5816 Wood 1", drilled 3.08
AP5817 Glass 3/4", solid 1.61
AP5818 Glass 1", solid 1.67
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/